Warma floor drain for garden saunas

The outdoor sauna floor drain is intended for the drainage of outdoor saunas or similar buildings.

The depth of the gutter is 60mm at the deepest point and 40mm at the shallow end. The gutter has a 20mm/1.5m pour ready from both directions, pouring in the middle. There are three parts in the package, 2 x 1.5m gutters with a ready-made pour and a 50cm long connecting piece with a 75mm drain outlet from the middle down. The parts are connected to each other with glue/screws and all parts can be modified/shortened to the desired size.

Installation is easy. 2 pieces of floor gutter shortened to fit are installed on the floor on the supporting timberbalks and a connecting piece is installed in between, from which the water is led to the 75mm drain pipe. The length of the drainage can be adjusted by shortening it between 1600 and 3400 mm. The ends of the drainage are supported with the included end pieces. The end pieces are attached with screws/rivets and sealed with glue. For installation you need: Cordless drill, Sheet metal scissors, Mounting screws, Adhesive compound.

The width of the bottom of the gutter is 90mm, the suitable installation gap between the floor timbers is approx. 100mm. Material is 0.6 mm galvanized sheet.